In the 1880’s when our place was built it was most likely lit at night by kerosene lamps, candles, and possibly even gas lamps. We sometimes lose sight of that picture of what took place on these streets and between these walls so long ago: Roaring fires in the wood burning fireplaces, horse & carriages clacking down the cobble stone streets outside, and the flicker of gas lamps and candle light. Fast forward 130 years and our modern light fixtures are hanging from the same medallions (or at least in a similar spot) that those original fixtures hang.
With that in mind we really had no intention of veering far from the original plan and adding recessed lighting to our place. We have original plaster moldings and ceilings in most rooms and we were happy to have regular light fixtures with no need or desire to have recessed lights that would require altering them.
On the other hand, there are a couple of areas that in any restoration most people would want to modernize: Kitchens and bathrooms. So if we were going to entertain recessed lighting anywhere those would be the places.
In the kitchen we made a game-time decision to drop the ceiling a few inches to solve a plumbing issue in the bathroom upstairs. We also installed an LVL beam in this area for support where a bearing wall was removed. The beam was drywalled and visible, so it separates the area where the ceiling would be lowered and makes it easily unnoticed. Even though our house was built in the 1880’s we wanted the kitchen to feel modern, inviting, and yes, well-lit. The lowered ceiling would give us the opportunity to add some recessed lights. Since we were already altering the ceiling and it is in an area that is being modernized we decided to add the recessed lights. Just three, and we wanted to make sure they were as streamlined and low profile as possible.
The ceiling only needed to be dropped a few inches and we didn’t want to go any further than that. We found some great 4” LED low profile lights from Nadair. They can be installed with very little room and are only about a half inch thick. They are also sit flush to the ceiling so we liked how they would blend into the room.
The other area that we wanted to be modern is our master bath (our guest bath has a vintage feel). We redid the ceiling to level it off because the ceiling that was there (not original) was noticeably slanted. The shower of our dreams that we built has modern charcoal hex tile and is glassed up with a frameless enclosure. We needed modern and low profile lighting as well. We installed one 6” Nadair LED slim recessed light in the center. It really completes the shower and bathroom.
Even though we went out of our way to restore as much of the original features that we could, we modernized the places we needed to. Although recessed lighting doesn’t always fit into a Brooklyn brownstone, we felt it was a good opportunity to bring the place up to a modern standard of lighting. We have nothing but respect for anyone who restores a 100+ year old building with attention to historical detail in every place, but for us restoring our place was also about making it comfortable and livable. So we are really happy with the modern feel of the kitchen and master bath, and creating a modern lighting plan there was an important as well.
In other kitchen lighting news, some of the last things to be installed in our house are finally up. We couldn’t find the right pendants for our kitchen island that were in our price range, so we decided to build them ourselves! For these lights we didn’t want them to have too much of a modern feel. We wanted them to blend the modern kitchen with the historic mouldings and details. We bought each individual piece of the pendants, wired them, assembled the fixtures, and hung them. Our secret weapon was Antique Lamp Supply. They have thousands of different lamp and light fixtures pieces that can create pretty much any look. They also have some great how-to guides to help with the process.
Finally, the last part of our kitchen lighting plan are some simple under cabinet lights from Nadair. They are low profile and easy to install. They complete the modern and comfortable feel of the kitchen.
Thanks for reading! Subscribe before for updates and don’t forget to follow us on Instagram!
